|
Apart from
tooth pitch and tooth form, the exact set is essential for the
performance of the saw blade. The correct clearance of
back is achieved by the specific set for the cutting
application. This is to avoid blade pinching, very
important in problematic cutting jobs. Width and type of
set are tuned to the cutting application:
Standard-Raker Set (S, SW)
up to 10 tpi
tooth forms N, H
Variable-Group-Set (G, GW)
0,75/1,25 to 10/14 tpi
tooth form K
Wavy set (W)
14 to 32 tpi
tooth form N
|
 |
